Відео

I got so frustrated with everything in the comments I drank the alcohol and went to the hospital thanks

I'm asking, who does NOT use it and why? seriously

Im having the same problems with them sent my DD2 in for repair they said they couldnt fix it so they sent me someone elses junk all scratched up dont know anything about it lol Mine was Brand New Fanatec Sucks .I just like you really liked my csw2.0 and made the mistake of upgrading. now they wont even reply to my emails.

Your setup actually does not work. Rubber is not an isolator, Granite is not anti resonance, your wood table rings like a bell. I'll wager if you listen to the plinth with a stethoscope and tap the wood table, you will hear it. By far a better solution is simply just Sorbothane pieces under the feet of the plinth. Sorbothane is the only material on earth that actually does not transmit vibration (when properly used).

I am in the s ame situation. Plus I also use a ROG Ally but not much. I'm thinking maybe it's time to get rid of 1 since I have a gaming PC AND a gaming laptop too lol

I suppose the fact that the boy in top THEN photo is Jonathan Lipnicki and the man in the bottom NOW photo is Christopher McQuarrie doesn't really matter, Tom C still looks great for him age. 😂

I know that the meme is about Tom Cruise.. but .. The picture on top is from the movie Jerry Maguire (1996). That kid's name is Jonathan Lipnicki. He was 5 years old in this Movie The guy on the bottom picture is Christopher McQuarrie

I have the problem of it just shutting off after a few minutes and right now it will not turn on. stays on red light

Water it down to use on sensitive surfaces 😅

BAMBOO CUTTING BOARD IS THE BEST CHOICE .

Jesus, I'm just going to hang my damn tv.

I've always said it's rubbish;how many folks listened to me ? !

I work with fiber ribbons and single stranded fibers. They are pretty flexible from a physical standpoint. They can be bent around a pencil without breaking but any bend less than a common soda can will show errors with a any fiber testing equipment so definitely pay attention how you are storing and routing. Also there must be a conversion at the plug bcs you can't just plug hdmi fibers into the copper hdmi port on your TV or components. This is what most likely is causing issues with the fiber as fiber on it's own i spliced properly to equipment made to recieve optical cable is remarkable but this is definitely not a fiber connection to fiber connection. So I agree unless you need long runs go with what works. Copper hdmi already meet the required specs for any TV and component on the current market. Why pay extra for speeds your components arent running at that doesn't do what you need it to do reliably yet that cost 3 to 4xs over copper hmdi? When the time comes that tvs are sold and 8k 18k hits the market they will have much more reliable cables at the time.

I work with fiber ribbons and single stranded fibers. They are pretty flexible from a physical standpoint. They can be bent around a pencil without breaking but any bend less than a common soda can will show errors with a any fiber testing equipment so definitely pay attention how you are storing and routing. Also there must be a conversion at the plug bcs how can you plug hdmi fibers into the copper hdmi port on your TV or components? Fiber one it's own is remarkable but this is definitely not a fiber connection to fiber connection. So I agree unless you need long runs go with what works. Copper hdmi already meet the required specs for any TV and component on the current market. Why pay extra for something you can't use that doesn't do what you need it to do reliably yet that cost 3 to 4xs over copper hdmi?

Is it safe to use on a car’s bodywork as a cleaner before you apply wax? Thanks.

I have long thought that conversations with Sophia are merely scripted.

"Isopropyl alcohol removes oils, adhesives, fingerprints, soldering flux and other contaminants, making it ideal for cleaning electronics. However, it is important to note that only alcohol with a grade of 90% or more should be employed on circuit boards and other internal electronics. Lower-grade alcohol contains too much water to be safe. It also evaporates too slowly and may leave behind unwanted residue." You're using 70%...is this inaccurate?

Jumpscare at 0:00 hope this helped 😊

The intro I didn't see that coming

Thank you for the video. It was short and to the point and the hamster story was icing on the cake! 🐹🔥🔥🔥🎂😂

Terrible idea.

didnt fool me for 1 sec.... i always suspected some is typing in the response from behind the stage

Bad intro Screaming voice

Can I use sanitize Alcohol 70% with shellac ?

Truly is the worst thing that ever happened to cinema.. and most people even after hearing this will still be too lazy to go through all the steps to turn it off!

The protective layer of a screen can be damaged even by isopropyl. You'd want to use a lower percent like the 70% he has and not to drown it, apply it to your towel (so that it dries quickly off the screen).

Tang ina mo

I heard a lot of people were let down by this and it’s expensive!! Doesn’t even get that loud

Sorry but i absolutely LOVE my Sony motion interpolation features...it's like playing a game on 60fps instead of 30...

My TV has problem of turned colours like brocan tv colour 😢i try setting i can't find help

what about bathing airpods in IPA? Like leaving it for 24 hours in the bath.

Parts of this video are incorrect. Isopropyl alcohol is used in the electronics industry and it is a safe and effective cleaner, but what is being cleaned in the industry is not grease, in is the flux residue left after the soldering operation. Isopropyl alcohol will dissolve grease, but is not the best solvent for this, something like lighter fuel, or many other organic solvents without an -OH hyroxyl group, will work better, but some of them might also possibly dissolve your whole TV. Ethyl alcohol is not "greasy and corrosive" it has very similar properties to isopropyl alcohol, missing one carbon atom in the chain compared to propanol (or isopropyl alcohol). Ethyl alcohol (=ethanol) is not easy to obtain in it's pure form as the government worries about you evading duty. You buy it as usually IMS (industrial methylated spirits) and you need a licence to buy it, vodka is quite close. I use IMS for preserving spiders. So this video is incorrect technically, but for practical purposes correct enough.

Wtf is this intro

That's 6:05 i won't get back

Disable the HDMI pass throught

Get to the FuKin point already!

So basically this dude is a sceptic.

I’m mad because my TV keeps changing it to game mode..

Brilliant Thank you,,,,, this Has helped Heaps 🙂🙂 Your a Legend

It’s 99% BS but a great vid to spread fear, uncertainty and doubt. A good tool that keeps popping up when price dips. Thank you man!

Is it better running HDMI over CAT

👍

It left a big mark on smartphone screen

i always use isopropyl for cleaning components as long as there's no rubber gaskets or anything that can be damaged.

Naim qb2 or Devialet Mania ? Thanks

Woojer vest & strap 3 are pretty nice. Good review on the Woojer Edge.

Thanks a lot dude. I just had the cops called on me because of your effing intro. I watch UA-cam videos on my tv and i had it on medium volume but your intro is so loud that my neighbors called the cops thinking i was decapitating someone or something.

Thank you! My Echo Studio stopped working when I got a new phone. Amazon was no help. Your simple method worked and I am back up an running.

Wacko host scares people with an insane scream then proceeds to lie and insult his audience and give misinformation like it is safe for all screens and electronic etc. Posts below some commented it ruined the screens on some devices like Apple and ruined insides of some TV and wood, etc.

Nice hack! Do you think the adjustable feet are not necessary if you already have a perfectly level rack? So just rubber feet instead?